Saint Gobain Pro-Fill Jointing Compound, 25 Kg, 10 Kg, Service Temperature 0 degree C min 50 degree C max, Swelling Pressure Less than 16 bars after 3 days stored in tap water

Application, Gyproc pro, Fill is an air, Drying and finishing powered jointing compound utilized for the plasterboard finishing at vertical and horizontal joints. This item functions as also used for filling the small cut, Outs and, Uneven gaps finishing of the internal and external corner joints. Product featuresair drying drying time is influenced by temperature & humidityminimum or no shrinkageexcellent workabilityexcellent bond strength and higher crack resistancezero/ minimum wastageprocess of jointing & finishingfirst coatusing an applicator / trowel, Fill the recess formed by the edges of the sheets with gyproc pro, Fill . Centre the paper tape along the joint and using a taping knife / trowel press the tape down into the pro, Fill ensuring no air bubble remain behind the tape. Immediately apply a thin coat of pro, Fill over the outer sheet of the tape 100, 150 mm wide . Allow it to drysecond coatapply a second coat of gyproc pro, Fill with an applicator / trowel. Ensure that this coat extends outside the area of the first coat 200, 250 mm wide . Allow to thoroughly dry and scrape back any build, Up of compound along the joint. Third coatapply a finishing coat of gyproc pro, Fill with an applicator / trowel. Joint edges should be feathered at least 50 mm beyond the edges of the previous coatallow to dry. Lightly sand belonging to the same group direction as the joint using finer sandpaper.